.
- Nokia 610
- >
- 1. Using a remote SIM card with Bluetooth wireless technology
- >
- 4. Getting started
- >
- Switching on/off and off mode
- >
- Switching off the phone
- >
- The factory setting for the
Nokia 610 - The factory setting for the
Nokia 610 > The factory setting for the
- <GRAPHIC>
- <GRAPHIC>
- DECLARATION OF CONFORMITY
- DECLARATION OF CONFORMITY
- We, NOKIA CORPORATION, declare under our sole responsibility that the product TFE-4 is in conform
- http://www.nokia.com/phones/declaration_of_conformity/
- <GRAPHIC>
- Copyright © 2004 Nokia. All rights reserved.
- US Patent No 5818437 and other pending patents. Tegic Communications, Inc. All rights reserved.
- Nokia, Nokia Connecting People, and Navi wheel
- Bluetooth is a registered trademark of Bluetooth SIG, Inc.
- Nokia operates a policy of continuous development. Nokia reserves the right to make changes and i
- 9362625 / Issue 1
- Table of contents
- For your safety
- For your safety
- Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed in
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- <GRAPHIC>
- Network services
- About accessories
- 1. Using a remote SIM card with Bluetooth wireless technology
- 1. Using a remote SIM card with Bluetooth wireless technology
- 1. Using a remote SIM card with Bluetooth wireless technology
- The car kit phone supports Bluetooth wireless technology and Bluetooth SIM access profile.
- Bluetooth wireless technology Bluetooth wireless technology is an international standard for wire
- Bluetooth SIM Access Profile Bluetooth SIM Access Profile is an industry standard which allows a
- You have switched on a compatible mobile phone supporting the Bluetooth SIM Access Profile standa
- <GRAPHIC>
- When the car ignition is switched on, a wireless connection is established between the compatible
- With Bluetooth SIM Access Profile, the car kit phone combines the advantages of a fixed installed
- If desired, a separate car SIM card can be inserted in the car kit phone. This SIM card can be us
- If you use Bluetooth technology functions regularly, you can deactivate the option "Authorisation
- 2. General information
- 2. General information
- Overview of the car kit phone equipment
- Overview of the car kit phone equipment
- Your car kit phone is made up of several components, which are described below:
- <GRAPHIC>
- 1. Radio unit TFE-4
- <GRAPHIC>
- Special features
- Special features
- For enhanced safety and operating comfort of wireless communication in the vehicular environment,
- Accessing a remote SIM card via Bluetooth SIM Access Profile technology
- Voice dialling
- Voice commands
- Voice recorder
- Copying contact entries from your mobile phone
- Multi-user capability
- Switchover to wireless headset
- Switchover to wireless headset
- <GRAPHIC>
- To be able to use this feature, you will first need to pair the compatible wireless headset and t
- In principle, a wireless headset with Bluetooth technology can only establish one Bluetooth wirel
- If you have already established a Bluetooth SIM Access Profile wireless connection to a compatibl
- Quick access to the contact entries
- Quick access to the contact entries
- <GRAPHIC>
- To find a particular contact entry, with the display in standby, scroll with
- Before you can use this feature you will have to make entries for contacts in the car kit phone.
- You may assign up to 5 phone numbers to any name entered in your contacts. For further informatio
- Mobile data services using Bluetooth wireless technology
- Using a car SIM card
- Comfortable volume regulation with Navi wheel
- Before putting your phone into operation
- Before putting your phone into operation
- Please read the information set out below before putting your car kit phone into operation:
- The phone is automatically switched on with the car’s ignition.
- Check your car kit phone equipment regularly to ensure that it is correctly mounted and is workin
- Using a car SIM card
- Using a remote SIM card
- Using a remote SIM card
- You can operate the car kit phone using a remote SIM card under the following conditions:
- The remote SIM card is inserted in a compatible mobile phone which supports Bluetooth wireless te
- Stickers in the sales package
- Access codes required for the car SIM card
- 3. Your car kit phone
- 3. Your car kit phone
- Display SU-11
- Display SU-11
- <GRAPHIC>
- <GRAPHIC>
- You may adjust the display illumination to optimise performance. For further information, see
- Display indicators
- Call indicators
- General indicators
- Indicators for recorder functions
- Indicators for Bluetooth functions
- Notification indicators
- Basic components of the CUW-3 input device
- 4. Getting started
- 4. Getting started
- Installing the car SIM card
- Installing the car SIM card
- The car kit phone can be used with a separate, own car SIM card. In this case, you will need to i
- Keep all miniature SIM cards out of the reach of small children.
- The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when h
- Switch off the car’s ignition before inserting the SIM card.
- Switch off the car’s ignition before inserting the SIM card.
- Gently press the catch on the radio unit casing (1) to open and lift the cover (2).
- Slide the SIM card holder (3) as shown to unlock it.
- Open the SIM card holder by lifting it upwards on one side as depicted in figure (4)
- Carefully insert the SIM card into the holder (5). Make sure that the SIM card is inserted proper
- Push the SIM card holder down into its original position and lock it into place by sliding it in
- Switching on/off and off mode
- Switching on/off and off mode
- If wireless phone use is prohibited or when it may cause interference or danger, switch your car
- Switching on the car kit phone
- Switching on the car kit phone
- To switch on your car kit phone, simply turn the ignition key. Your car kit phone is connected to
- Initial operation, a SIM card has not been assigned to the active user profile
- Initial operation, a SIM card has not been assigned to the active user profile
- If you have not assigned a SIM card to the car kit phone or to the active user profile, you will
- Operation using a remote SIM card The car kit phone will automatically begin searching for a comp
- Operation using a remote SIM card The car kit phone will automatically begin searching for a comp
- Using the car SIM card If the message
- Remote SIM card assigned to active user profile
- Remote SIM card assigned to active user profile
- If you have already assigned the SIM card inserted in a compatible mobile phone to the active use
- If you use Bluetooth technology functions regularly, e.g. to copy contact entries to the car kit
- However, if you have not saved the PIN code belonging to the SIM card installed in the compatible
- Reconnect remote SIM card
- The car SIM card will only be assigned to the active user profile as long as the car ignition is
- Assign SIM card
- Car SIM card assigned to active user profile
- Switching off the phone
- Off mode
- Off mode
- <GRAPHIC>
- Press and hold
- When the car kit phone is in off mode, an established wireless Bluetooth SIM Access Profile link
- If the wireless Bluetooth SIM Access Profile link between the car kit phone and the compatible mo
- 5. Call functions
- 5. Call functions
- Voice dialling
- Voice dialling
- <GRAPHIC>
- Before using voice dialling, note that:
- Before using voice dialling, note that:
- Voice tags are not language dependent. They are dependent on the speaker's voice.
- Voice tags are not language dependent. They are dependent on the speaker's voice.
- Voice tags are sensitive to background noise. Record them and make calls in a quiet environment.
- When recording a voice tag or making a call by saying a voice tag, speak clearly into the microph
- Very short names are not accepted. Use long names and avoid similar names for different numbers.
- You must say the name exactly as you said it when you recorded it. This may be difficult in, for
- Before you can use this feature you will have to record voice tags for numbers stored in the car
- To voice dial a number, press
- To indicate that it has recognised the voice tag, your car kit phone will play back the voice tag
- Dialling from the contacts (name search)
- Redialling
- Using the NaviTM
- List of favourites
- List of favourites
- This list may contain up to 12 name tags you have assigned to phone numbers. For further informat
- You can call the list from the standby display quickly and easily.
- Call waiting service
- Options during a call
- Options during a call
- The following options are available to you during an active call:
- Send DTMF
- To view the list of options:
- Press
- Send DTMF
- Mute call
- Contacts
- Accepting or refusing an incoming call
- 6. Using the menu
- 6. Using the menu
- The Nokia 610 car kit phone offers you an extensive range of functions, which are grouped in menus.
- Accessing a menu function
- List of menu functions
- List of menu functions
- n
- n
- n
- n
- n
- n
- Set time and date
- Set time and date
- Call settings
- Phone settings
- Voice mailbox
- GPRS modem
- Security settings
- Equaliser settings
- Restore factory settings
- n
- n
- n
- n
- 7. Menu functions
- 7. Menu functions
- Messages
- Messages
- <GRAPHIC>
- Remember that traffic safety comes first. Don’t use a hand- held phone while driving and only use
- When sending messages via the SMS network service, your car kit phone may display the words
- Inbox
- Inbox
- <GRAPHIC>
- Any short messages sent to your car kit phone are shown in the order in which they are received.
- If you have established a Bluetooth SIM Access Profile connection to a compatible mobile phone, a
- Unread text messages are indicated by
- A flashing SMS indicator
- If you have received more than one text message:
- Select the
- Your car kit phone comes with a number of options for handling the message selected.
- Press
- Call
- Reply with template
- Save as template
- Erase
- Message settings
- Message settings
- To be able to send short messages, you first need to make some settings on your car kit phone.
- Message centre number
- Reply via same centre (network service)
- View templates
- View templates
- Your car kit phone can save up to 10 templates to be sent as short messages. Five standard templa
- Send
- Erase
- Call register
- Call register
- <GRAPHIC>
- The phone registers missed and received calls only if the network supports these functions and if
- In these lists you can view up to 10 of the last calls made to your phone or received or up to 10
- Three options are available for each of the items in the call register:
- Select an entry in the desired list and press
- Missed calls
- Received calls
- Dialled numbers
- Contacts
- Contacts
- <GRAPHIC>
- For each user profile, up to 500 names can be stored in the car kit phone memory together with nu
- If the number of contact entries to be copied from the memory of a compatible mobile phone via Bl
- You can assign up to five phone numbers for each name. When you select a name from the contact en
- Searching for names and numbers
- Searching for names and numbers
- You can access the list of names and phone numbers quickly from the standby display:
- Scroll with
- For further information, see
- Erasing contact entries
- Querying the memory status
- Tone settings
- Settings
- Settings
- <GRAPHIC>
- To make any of the settings below, select the
- Setting the time and date
- Call settings
- Call settings
- This option lets you set a variety of call features. To make call settings, with the display in s
- Select the
- Own number sending (network service)
- Call divert (network service)
- Call divert (network service)
- With
- Your car kit phone offers you a wide variety of options to choose from:
- Divert all voice calls
- Divert if out of reach
- To make call divert settings, with the display in standby:
- You can select any of four options for each of the divert features offered:
- Activate
- Automatic answer
- Call waiting (network service)
- Phone settings
- Phone settings
- Select this option to customise your car kit phone settings.
- Display text language
- Display backlighting
- Cell info display
- When this function is activated, information about the radio cell you are currently using will be
- Network selection
- Power down timer
- Power down timer
- Your car kit phone comes with a power down delay that keeps your phone in service for the period
- The original factory setting for the power down timer is zero minutes. The power down delay is li
- Remember that your car kit phone runs off the car battery. When setting the power down timer, tak
- To set the power down timer, with the display in standby:
- A message on the display will notify you that the power down timer has been set.
- Voice mailbox
- Voice mailbox
- Your service provider may offer you a voice mailbox service, which you have to install before you
- Entering your voice mailbox number
- Listening to voice messages
- GPRS modem settings (network service)
- GPRS modem settings (network service)
- You can use your car kit phone as a modem to enable GPRS connectivity. Note, however, that you wi
- Before you can use GPRS:
- You need to subscribe to the GPRS service of your network operator or service provider.
- To set up a GPRS access point, with the display in standby:
- Select the
- For further information and to download modem driver software for your computer and/or laptop com
- Charges for GPRS and related applications
- Security settings
- Security settings
- For some security settings (for example, when calls are limited to closed user groups or fixed di
- PIN code request (available for car SIM card only)
- PIN code change (available for car SIM card only)
- Closed user group
- Fixed dialling numbers (only available for the car SIM card)
- Fixed dialling numbers (only available for the car SIM card)
- You can restrict your outgoing calls to selected phone numbers, if this function is supported by
- If you wish to use this feature when accessing the SIM card of a compatible mobile phone connecte
- You can choose from three options for this function when using the car SIM card installed in your
- Off
- To set up fixed dialling numbers, with the display in standby:
- Select the
- For further information, see
- Equaliser settings
- Equaliser settings
- Your car kit phone supports a variety of options for output over a loudspeaker:
- Direct connection to the SP-2 loudspeaker supplied in the sales package.
- Connection to compatible car radio loudspeakers via the audio line-in of your car radio. You will
- To make the desired setting, with the display in standby:
- Select the
- Restore factory settings
- Voice tags
- Voice tags
- <GRAPHIC>
- <GRAPHIC>
- Voice tags are not language dependent. They are dependent on the speaker's voice.
- Voice tags are not language dependent. They are dependent on the speaker's voice.
- Voice tags are sensitive to background noise. Record them and make calls in a quiet environment.
- When recording a voice tag or making a call by saying a voice tag, make sure to speak clearly int
- Very short names are not accepted. Use long names and avoid similar names for different numbers.
- You must say the name exactly as you said it when you recorded it. This may be difficult in, for
- Voice dialling
- Voice dialling
- You can assign voice tags to phone numbers and your car kit phone will automatically try to dial
- Recording a new voice tag
- Voice tag list
- Voice dial a number
- Voice dial a number
- <GRAPHIC>
- If you are using a compatible headset with Bluetooth technology, press the key on the headset to
- When an application using the GPRS connection is sending or receiving data, you cannot make a cal
- Voice commands
- Voice commands
- You have a selection of phone functions which can be activated by saying a voice command. A voice
- Play
- Recording voice commands
- Recording voice commands
- This option allows you to record a voice command (one or more words acting as a spoken command) a
- With the display in standby, scroll with
- The voice command list includes the phone functions listed for voice commands. Each function on t
- Play voice commands
- You can use a shortcut to access the list of voice commands direct from the standby display:
- Press
- Executing a voice command
- Recorder
- Recorder
- <GRAPHIC>
- Obey all local laws governing recording of calls. Do not use this feature illegally.
- You can make up to 10 recordings as long as you do not exceed an overall recording time of five m
- New recordings are automatically saved in the memory. When the memory is full, the message
- Press and hold
- You can easily play back your recordings using a voice command. Say the voice command and your ca
- Before you can use this shortcut, you will have to assign a voice command to this function in you
- Record
- Record
- This option allows pieces of speech to be recorded and automatically saves the recording.
- To make a recording, with the display in standby:
- Scroll with
- If you are engaged in an active call and wish to make a recording:
- All tape recordings are stored and numbered (e.g. tape 1). To view the list of recordings, with t
- Select the
- Two options are available for the recordings:
- Scroll to the desired option and press
- Play
- Delete
- Bluetooth wireless technology
- Bluetooth wireless technology
- <GRAPHIC>
- Since devices with Bluetooth technology communicate using radio waves, your car kit phone and the
- The car kit phone supports Bluetooth SIM Access Profile technology for wireless access to the rem
- If you wish to use this function, make sure that both the car kit phone and the other device supp
- Activating and deactivating Bluetooth
- Searching for accessories with Bluetooth technology
- Searching for accessories with Bluetooth technology
- This feature allows you to search for accessories which support Bluetooth wireless technology, e.
- To begin searching, with the display in standby, scroll with
- The car kit phone will now begin to search for accessories supporting Bluetooth wireless technolo
- Scroll with
- A wireless headset with Bluetooth technology can only be found by the car kit phone if there is n
- For further information on searching for devices with Bluetooth technology, see
- If you wish to start Bluetooth pairing with a selected device supporting Bluetooth technology:
- Press
- Pairing using a Bluetooth passcode
- Pairing using a Bluetooth passcode
- To create a connection using Bluetooth wireless technology, you will need to exchange Bluetooth p
- If the devices have been successfully paired, you will not need to repeat this procedure when est
- If a fixed passcode is not supplied with a device with Bluetooth technology (e.g. a mobile phone)
- If the car kit phone has found a compatible mobile phone which supports the Bluetooth SIM Access
- The wireless connection using Bluetooth SIM Access Profile technology meets the high security req
- If the compatible mobile phone supporting Bluetooth SIM Access Profile technology should itself g
- View active devices with Bluetooth technology
- View paired devices
- View paired devices
- You can view a list of Bluetooth wireless technology paired devices by selecting this option. Som
- To view the list of paired devices, with the display in standby, scroll with
- Note that the latest pairing will be listed at the top.
- Create connection
- Delete pairing
- Request authorisation
- Edit Bluetooth name
- Edit Bluetooth name
- Select this option to change the name of the device with Bluetooth technology which is paired wit
- To view the list of paired devices, with the display in standby, scroll with
- Scroll with
- If you have selected
- To delete characters in the name, press
- The car kit phone’s Bluetooth name
- The car kit phone’s Bluetooth name
- Use this option to change your car kit phone’s Bluetooth device name, which is shown to others. T
- To view the name of the car kit phone scroll with
- Car kit phone visibility
- Car kit phone visibility
- In order to be able to establish a Bluetooth wireless connection between two compatible devices w
- Make sure that the Bluetooth function is activated in all compatible devices with Bluetooth techn
- You can activate or deactivate the visibility of the car kit phone. The factory setting is on.
- To change the visibility of your car kit phone, with the display in standby, scroll with
- Even if you car kit phone’s visibility has been activated, it will not be visible for other Bluet
- Second Bluetooth connection
- Second Bluetooth connection
- This setting is required if your car kit phone is to be visible for other devices with Bluetooth
- When this setting is selected, the car kit phone will be visible for other Bluetooth devices for
- When your car kit phone is not connected to a compatible device using Bluetooth wireless technolo
- To access this option, with the display in standby, scroll with
- User data
- User data
- The car kit phone can store and administrate data or settings under two different user data profi
- The indicator for the currently active user profile is shown in the status row of the display. If
- Download contacts
- Download contacts
- You can use this feature to copy contact entries from the car SIM card inserted in the car kit ph
- This feature is important because you do not have direct access to the contact entries stored on
- With the display in standby, press
- If you are operating your car kit phone using a remote SIM card, the contacts stored in the compa
- If you are operating your car kit phone using the car SIM card inserted in the radio unit, three
- Scroll with
- Paired devices with Bluetooth technology
- Car SIM card
- Searching for devices that support Bluetooth technology
- Change user
- Change user
- You may save two user profiles in your car kit phone to be used as desired. The settings for each
- <GRAPHIC>
- With the display in standby, press
- Scroll with
- You may be prompted to enter the PIN code belonging to the remote SIM card.
- You may change whether the PIN code of the remote SIM card is to be saved at any time desired by
- If you should change the PIN code of the remote SIM card in the mobile phone at a later time, the
- User settings
- User settings
- This feature lets you make the desired settings for the active user profile and the contacts to b
- With the display in standby, press
- The following options are available for selection:
- Scroll with
- Assign SIM card
- Assign SIM card
- An active user profile always has a SIM card assigned to it. When personalising user profile 1 or
- To assign a new SIM card to the car kit phone, select one of the following options:
- Names of paired devices,
- Scroll with
- Names of paired devices
- Names of paired devices
- If you select a mobile phone from the list of paired mobile phones, the car kit phone will establ
- The car kit phone will then ask if you wish to save the PIN code you have just entered for a late
- If the operating voltage is interrupted, the PIN code of the remote SIM card stored in the car ki
- Car SIM card
- Search for Bluetooth phone
- View active SIM card
- Download settings
- 8. Receiving and forwarding business cards and calendar items
- 8. Receiving and forwarding business cards and calendar items
- You can receive or forward data such as business cards or calendar notes from or to a compatible
- Receiving a business card or calendar item
- 9. Data transmission
- 9. Data transmission
- GPRS (General Packet Radio Service)
- HSCSD (High Speed Circuit Switched Data)
- HSCSD (High Speed Circuit Switched Data)
- The car kit phone enables you to use GSM high-speed data services (network service).
- You can use high-speed functionality when your car kit phone is connected to a compatible compute
- For information on the availability of and subscription to high- speed data services, please cont
- Reference information
- Reference information
- Remember that the safety of operating a motor vehicle in traffic requires the full attention of a
- Cellular transmission
- Cellular transmission
- Your car kit phone employs the data transmission capabilities of the GSM network to send faxes, s
- GSM data capabilities of your car kit phone
- GSM data capabilities of your car kit phone
- We recommend that you move the car to a location where the strongest possible cellular signal can
- Cellular data communications are subject to a number of factors that may cause interference:
- Noise
- Handovers
- Dead spots and dropouts
- Low signal strength
- Low signal strength
- Due to either distance from a base station or obstacles between your car kit phone and the base s
- Data and fax transmission will work best when the car is stationary as this ensures that the sign
- Check the signal strength on your car kit phone display. If the cellular signals are not strong e
- 10. Installation
- 10. Installation
- Your Nokia 610 car kit phone
- Your Nokia 610 car kit phone
- The Nokia 610 car kit phone is designed for installation in motor vehicles. The sales package con
- <GRAPHIC>
- The Nokia 610 car kit phone may only be installed by a qualified service technician using the app
- Note that the instructions contained in this installation guide are general guidelines which appl
- For important safety information and/or instructions on the operation, care and maintenance of yo
- Safety first
- Safety first
- The basic safety guidelines set out below are to be observed when installing the car kit phone.
- Make sure that the car ignition is off and disconnect the car battery before beginning with the i
- Make sure that the car ignition is off and disconnect the car battery before beginning with the i
- Do not smoke when working on the car. Make sure that there is no source of fire or flame nearby.
- Take care not to cause damage to electrical cables, fuel or brake lines or safety equipment durin
- Make sure not to impact the steering or braking systems or other key systems essential for proper
- RF signals may affect improperly installed or inadequately shielded electronic systems in motor v
- The car kit phone may only be used at an operating voltage of 12 V with the minus pole earthed. F
- Do not operate your car kit phone off the car battery for a longer period of time, i.e. with the
- In order to comply with RF exposure requirements for mobile transmitting devices, a minimum separ
- Mounting
- Mounting
- <GRAPHIC>
- Radio unit TFE-4 (Pos.1)
- Radio unit TFE-4 (Pos.1)
- We recommend that you mount the radio unit TFE-4 at a less visible position in the car interior.
- When mounting the radio unit, use the bracket which is included in the scope of supply: the unit
- Make sure to mount the radio unit in such a way that a connection using Bluetooth technology can
- When installing the radio unit, make sure to mount the bracket in such a way that the unit slides
- <GRAPHIC>
- Display SU-11 (Pos.2)
- Display SU-11 (Pos.2)
- The mount for the display unit is to be fixed to the dashboard or to any other location in the co
- Your service technician may be able to provide you with information on alternatives for mounting
- Remember that all equipment must be mounted so that it does not interfere with the operation of t
- <GRAPHIC>
- Input device CUW-3 (Pos.3)
- Loudspeaker SP-2 (Pos.4)
- Microphone HFM-8 (Pos.5)
- Microphone HFM-8 (Pos.5)
- Use of any other microphone than the microphone supplied with the car kit phone (HFM-8) may impac
- Mount the handsfree microphone approx. 30 cm from the user’s head, and position it so that it poi
- Use the double-sided adhesive tape supplied to fix the microphone as this will prevent noise from
- If the mute radio cable has been connected, when you accept an incoming call or when an outgoing
- System cable PCU-4 (Pos.6)
- GSM antenna (Pos.7) (not included in the scope of supply)
- Equaliser settings
- Equaliser settings
- Your car kit phone supports a variety of options for output over a loudspeaker:
- Direct connection to the SP-2 loudspeaker supplied in the sales package.
- To make the desired settings, select the
- Function test
- Scope of supply
- 1. Using a remote SIM card with Bluetooth wireless technology
- 11. Care and maintenance
- 11. Care and maintenance
- 11. Care and maintenance
- 11. Care and maintenance
- Your car kit phone is a product of superior design and craftsmanship and should be treated with c
- Keep the car kit phone and all its parts and enhancements out of the reach of small children.
- Keep the car kit phone and all its parts and enhancements out of the reach of small children.
- Keep the car kit phone dry. Precipitation, humidity, and all types of liquids or moisture can con
- Do not use or store the car kit phone in dusty, dirty areas. Its moving parts can be damaged.
- Do not store the car kit phone in hot areas. High temperatures can shorten the life of electronic
- Do not store the car kit phone in cold areas. When it warms up (to its normal temperature), moist
- Do not attempt to open the car kit phone. Non-expert handling may damage it.
- Do not drop, knock or shake the car kit phone. Rough handling can break internal circuit boards.
- Do not use harsh chemicals, cleaning solvents or strong detergents to clean the car kit phone.
- Do not paint the car kit phone. Paint can clog the moving parts and prevent proper operation.
- Use only an approved antenna. Unauthorised antennas, modifications or attachments could damage th
- All of the above suggestions apply equally to your car kit phone or any enhancement. If any of th
- 12. Important safety information
- 12. Important safety information
- Traffic safety
- Operating environment
- Electronic devices
- Potentially explosive atmospheres
- Vehicles
- Vehicles
- Only qualified personnel should service the phone or install the car kit phone in a vehicle. Faul
- Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
- Do not store or carry flammable liquids, gases or explosive materials in the same compartment as
- For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not
- Failure to observe these instructions may lead to suspension or denial of telephone services to t
- Emergency calls
- 11. Care and maintenance
- 13. Technical data
- 14. Glossary
- 11. Care and maintenance
Powered by helpdoc.net